MC2500 Chip


MC73110 Chip
MC58000 Chip
MC55000 Chip
MC2100 Chip
MC2300 Chip
MC2400 Chip
MC2500 Chip
MC2800 Chip
MC3110 Chip
MC3310 Chip
MC3510 Chip
MC73110 KIT
ATLAS Digital Amplifiers
ION Digital Drive
CME Stand Alone
Pro Motion
C Motion
VB Motion
Products Matrix
Application Notes
Market Solutions


Advanced Motion Control DOCUMENTATION


  • Available in 1, 2 and 4-axis versions.
  • High Speed (up to 5 M-pulses/sec) pulse and direction output.
  • Motion profiles include S-curve, trapezoidal, velocity contouring and electronic gearing.
  • Asymmetric acceleration and deceleration to custom program a trapezoidal motion profile.
  • Velocity and acceleration changes on-the-fly for trapezoidal and velocity-contouring profiles.
  • Incremental encoder quadrature input and parallel input for absolute encoder or resolver for on-the-fly motor stall detection.
  • Parallel and serial (point-to-point or multi-drop) communications interface.
  • Trace capabilities for system performance checks, maintenance and diagnostics.
  • Encoder rate of 5.0 Mcounts/sec allows use of fine resolution feedback devices for reading motor position.
  • Advanced breakpoint capability allows precise sequencing of events.
  • PLC-style programmable inputs and outputs, including a per-axis programmable input and output.
  • 256 16-bit word I/O locations for user-defined peripherals.
  • 8 general-purpose 10-bit analog inputs.
  • Two-directional limit switches, index input and home indicator per axis.
  • Axis settled indicator and tracking window in addition to stall detection.
  • Packaged in a 132-pin processor and a 100-pin logic device (surface mount CMOS technology).
  • Available in commercial and industrial temperature versions.
  • Software backward compatible with PMD's MC1xxx family (1451, 1251 and 1151 series).

Product Description

The NavigatorTM Stepping Motion Processor (MC2500 Series) is used in embedded control systems for industrial motion control, automation and robotic applications. Available in one (MC2510), two (MC2520) and four (MC2540) axis configurations, the MC25xx consists of two components, a 132-pin processor and a 100-pin logic device. Both components are surface mount CMOS technology and powered by 5 volts. The motion processor is driven by a host microprocessor via an 8-bit or 16-bit bus interface or through an asynchronous bi-directional serial port, giving users the ability to offload resource intensive motion control functions from the application’s host. The MC2500 Series offers high speed, programmable pulse and direction output at up to 5 M-pulses/sec. The motion processor operates in an open loop mode where the pulse generator is driven from output of the trajectory generator. Optional encoder feedback provides on-the-fly motor stall detection and allows the chipset to detect when the stepping motor has lost steps during a motion. Trace capabilities provide on-the-fly data storage for analyzing system performance and performing maintenance and diagnostics. With over 110 commands, PMD’s instruction set offers flexibility and versatility.

Instructions are used to initialize and control the motion processor. User selectable profiling modes supported by the motion processor include S-curve, trapezoidal, velocity contouring and electronic gearing. The MC25xx accepts input parameters such as position, velocity and acceleration from the host and generates a corresponding trajectory. The motion processor accepts feedback from an incremental encoder, up to 5 megacounts per second, or from an absolute encoder or resolver, up to 160 megacounts per second, to read the current axis position. Multiple breakpoints per axis offer precise sequencing and control of events by the application program. PLC-style instructions are provided, which operate on inputs and set outputs. The instructions use Event, Activity and Signal registers. Input signals include two limit switches (one for each direction of travel), home indicator, and a general-purpose programmable input per axis. One general-purpose programmable output signal is also provided per axis. Eight general-purpose analog (0-5 V) and 256 (16-bit wide) general-purpose discrete inputs/outputs are available.


首頁 | MC73110 Chip | MC58000 Chip | MC55000 Chip | MC2100 Chip | MC2300 Chip | MC2400 Chip | MC2500 Chip | MC2800 Chip | MC3110 Chip | MC3310 Chip | MC3510 Chip | MAGELLAN KIT | NAVIGATOR KIT | MC73110 KIT | ATLAS Digital Amplifiers | ION KIT | ION Digital Drive | CME Stand Alone | PRODIGY PCI | NAVIGATOR PCI | NAVIGATOR PC/104 | NAVIGATOR ISA | Pro Motion | C Motion | VB Motion | Products Matrix | Application Notes | Market Solutions


新 北 市 汐 止 區 康 寧 街 169 巷 23 號 7 樓 之 一


 02-2695-6755, 02-2695-7011, 02-2695-7033


顏永富 分機35

上次更新日期: 2016年04月13日。

<script type="text/javascript">var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");document.write(unescape("%3Cscript src='" + gaJsHost + "' type='text/javascript'% 3E%3C/script%3E"));</script><script type="text/javascript">var pageTracker = _gat._getTracker("UA-4862283- 1");pageTracker._initData();pageTracker._trackPageview();</script>