MC73110 Chip


MC73110 Chip
MC58000 Chip
MC55000 Chip
MC2100 Chip
MC2300 Chip
MC2400 Chip
MC2500 Chip
MC2800 Chip
MC3110 Chip
MC3310 Chip
MC3510 Chip
MC73110 KIT
ATLAS Digital Amplifiers
ION Digital Drive
CME Stand Alone
Pro Motion
C Motion
VB Motion
Products Matrix
Application Notes
Market Solutions


Brushless DC Motor Controller DOCUMENTATION


  • Controls 3-phase brushless DC motors
  • High performance digital current loop
  • Velocity loop with encoder or tachometer feedback
  • Internal velocity profile generator
  • Sinusoidal or 6-step commutation
  • Field oriented control
  • Hall sensor inputs
  • 6-signal PWM output with shoot-through protection
  • Direct analog signal input
  • Serial port up to 416 Kbaud
  • Quadrature encoder input up to 10 Mcounts/sec
  • Serial EEProm or onboard flash configuration load
  • High speed index input & capture
  • SPI (synchronous serial interface) command input
  • Emergency stop input
  • 10 kHz velocity loop & commutation rate
  • 20 kHz PWM output rate
  • Compact 64-pin plastic quad flat pack (PQFP)

Product Description:

The MC73110 Motor Control IC provides high performance digital current loop, velocity loop, and commutation, for brushless DC motors. This intelligent single-axis drive controller operates in internal velocity profile mode, velocity mode with an external velocity command signal, or torque mode with an external torque command signal. The MC73110 can be operated standalone, using pre-programmed flash-stored parameters, or through the serial port using microprocessor-style commands.

The current loop provides software-programmable P and I terms as well as other parameters such as shoot-through protection timing. Two symmetric 3-phase PWM (pulse width modulated) output modes are provided, 6-signal mode and 3-signal mode. Two direct-input analog signals provide current feedback from the drive. Commutation is software-programmable, and can occur using a six-step waveform or using a sinusoidal waveform. Velocity feedback is provided by the quadrature encoder, or via a direct-input analog tachometer signal. Velocity commands are provided by an internal profile generator, by a digital SPI 16-bit data stream, or by direct-input analog signal. A programmable compensation filter closes the loop and determines the motor command.

With over 130 commands, the Magellan Motion Processors provide a flexible and powerful instruction set to initialize and control the motion application, monitor ongoing performance, and synchronize overall machine behavior. Working with the Magellan devices, PMD’s powerful Pro-Motion® GUI makes it easy to graph and analyze system performance, while C-Motion® allows you to develop your own application using C/C++.

To create a complete motion controller, the MC73110 is connected to three half-bridge amplifiers, typically MOSFET or IGBT-based. The MC73110 is packaged in a compact 64-pin PQFP (plastic quad flat pack), and operates from 3.3 V. 


首頁 | MC73110 Chip | MC58000 Chip | MC55000 Chip | MC2100 Chip | MC2300 Chip | MC2400 Chip | MC2500 Chip | MC2800 Chip | MC3110 Chip | MC3310 Chip | MC3510 Chip | MAGELLAN KIT | NAVIGATOR KIT | MC73110 KIT | ATLAS Digital Amplifiers | ION KIT | ION Digital Drive | CME Stand Alone | PRODIGY PCI | NAVIGATOR PCI | NAVIGATOR PC/104 | NAVIGATOR ISA | Pro Motion | C Motion | VB Motion | Products Matrix | Application Notes | Market Solutions

台 北 縣 汐 止 市 康 寧 街 169 巷 23 號 7 樓 之 三
公司電話:+886-2-26958906(代表號) 02-2695-6755, 02-2695-7011, 02-2695-7033

上次更新日期: 2015年07月03日。

<script type="text/javascript">var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");document.write(unescape("%3Cscript src='" + gaJsHost + "' type='text/javascript'% 3E%3C/script%3E"));</script><script type="text/javascript">var pageTracker = _gat._getTracker("UA-4862283- 1");pageTracker._initData();pageTracker._trackPageview();</script>